Hematology Analyzer Reagents Excellent Performance Hematology Reagent For Nihon Khoden 3 Part Diff Analyzers

Intended Use

To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on Nihon Khoden 3 part diff hematology analyzers. This product is for In Vitro Diagnostic Use only.

Applicable Instument

For use with Nihon Kohden MEK-6318,MEK-6400,MEK-6700, MEK-6410,MEK-6420 hematology analyzers.

Procedures

• Remove all the reagent aspiration tubes from the currently used reagent boxes.
• Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water. Put the tubes into Labnovation reagents boxes or bottles.
• Run at least 50 backgrounds. Check for the acceptable background values. At first background counts can be seen, that should lower to normal after a few runs.
• Run all three levels of a dedicated commercial control. Check for the acceptable values.
• Recalibrate the unit if necessary.

• Re-calibration is recommended when changing the origin of the reagents.
• It is not recommended using different brands of solutions together on one unit of analyzer.
• Do not ingest. Avoid contact with skin and eyes.
• Skin contact: Flush with plenty of water.
• Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
• This kit is for professionals and in vitro diagnostic use only.

Specification

41-10-020	Diluent NK	20L
41-30-A05	Lyse NK	500ML X3
41-40-005R	Rinse NK	5 L
L-0401005	Cleaner-C	500ML

KIT COMPOSITION

DILUENT NK	NaCl≤9.4%, Buffer≤1.6%, Anti-Microbial Agent≤1.0%
CLEANER-C	Sodium Hypochlorite 5%
LYSE NK	Quaternary Ammonium Salt<10%, Sodium Lauryl Sulfate<1.5%
RINSE NK	Buffer<0.9%, Sufurctant<1.0%

Storage

Store the product at 5-35℃ in a dust free place with good ventilation. Temperature outside the range may damage the product.

The open vial life of the product is 30/60 days. Unused reagents should be discarded after 30/60 days. Do not mix residual with a new carton.

Advantage

• One source for all brands of analyzer
• Reagents for both 3-parts and 5-parts
• Ready-to-use final products and bulk OEM reagents
• ISQ13485:2003 and ISO9001:2008 certified
• CE marked, FDA cleared
• Well-established brand used by thousands of lab in 95 countries
• High quality, high performance and high fidelity of correlations with original brand

Labnovation Technologies, Inc. is an original manufacturer established in Shenzhen, China since 2001. We are dedicated in developing and manufacturing IVD instruments and reagents including HbA1c analyzer and reagents, rapid test reader & reagents, hematology reagents, clinical chemistry reagents, electrolyte reagents, wash solution and urine test reagents.
 

Labnovation products are developed in house, tested extensively in clinics and passed strict quality controls. All of our products are CE marked and approved by SFDA. In the past 15 years, our products have been exported to 110 different countries and used in 8000 hospitals worldwide. We provide both ready-to-use final products and bulk OEM reagents, including ready-to-use reagents, concentrated, and powder.

With an investment of 10% of our annual sales into R&D, we release new products every years. We win more and more domestic and international cooperation by company reputation and products quality while we actively take part in fairs like MEDICA,AACC, ARBA HEALTH and so on through which we are well-known by the companies in this field.